IVECO Euro6 Adblue Emulator
Avoid all of adblue system errors
Do not need adblue fuel
Do not get and adblue or NOx fault
Prevent torque loss
Importance of IVECO Euro6 Adblue Emulator:
Trucks generally give adblue or nox system errors so work hard. Your truck can cause loss so some adblue errors or fault lights.
These problems cause you money and time. After installing adblue remove emulator, you dont get other adblue errors and you do not need to add adblue fuel. After the installation, your adblue fuel level will be up automatically.
Adblue Remove emulator disable these systems:
AdxBlue system (All)
AdxBlue NOX sensor
DPF temperature sensors
Installation emulator for IVECO Euro 6:
1.Find wire number 7004(CAN High)and 7006（CAN Low)located on the front of car,Like on the photo.
2.Connect wires from the emulator as follows:
YELLOW wire from emulator -->7004(CAN High)
GREEN wire from emulator -->7006（CAN Low)
3.On the right side of the frame,locate the plug visibility on the photo.
4.Connect wires from the emulator (two long wirds in a black isolation)as follows:
WHITE wire from emulator --> GREY wire to pin nr 34 (CAN High)
BROWN wire from emulator --> ORANGE wire to pin nr 34 (CAN low)
5.You should commect the power supply(single wires) to the unit.
BROWN wire from emulator - Ground
WHITE wire from emulator - +24V(after the ingition)
6.You should disconnect plug from the pump and remove DPF.
if car have any errors,remove them from ECU
1pc x IVECO euro6 adblue emulator
Skype: yohotech, yoho.paul; yoho.monica;
EURO6 AdBlue Emulator of Mercedes Benz $36.90 $36.90 / piece
Volvo Euro6 Adblue Emulator $36.90 $36.90 / piece
Scania Euro6 Adblue Emulator $36.90 $36.90 / piece
8 in 1 Truck Adblue Emulator for Mercedes MAN Scania Iveco DAF Volvo Renault and Ford $19.90 $14.90 / piece25%OFF